When installing a plumbing system for sinks, you need to keep certain aspects in your mind and be careful of the details in it. Other than the errors and missteps that can happen, lack of vision or using the wrong tools can create lots of problems later on.
Besides, fixing those plumbing mistakes will drain your time and money. Therefore, it is best to get in touch with the best plumber Carlsbad to avoid unnecessary situations. In short, they will help prevent these mistakes and complete the work without having to face issues later.
Common Mistakes That A Plumber Can Make And How They Can Avoid Them:
No wonder, when you search for the best plumber near me, you expect that they have enough skills when it comes to installing a plumbing system for sinks. Still, there are common mistakes that some plumbers make. Here are some tips that they can take to avoid those mistakes.
1. Not Equipped With The Right Tools
One of the common plumbing mistakes that even experts commit sometimes is starting the work without having the right set of apparatus and tools. There is no denying that using the right tools will produce impressive and long-lasting results. So, a good and concerned plumber will carry the right tools in their box.
They will carry the tools whenever they are installing a new layer of tile, a new shower, a new toilet, or even a plumbing system for a sink. Therefore, it is wise for plumbers to have the right tools to avoid all kinds of confusion later.
2. Doesn’t Take Notice Of The Preliminary Work
Apart from gathering the right materials and tools, doing early preparation is equally important as well. Different types of preliminary tasks such as recording dimensions, taking level measurements, pre-fitting pipelines, etc. might appear as small tasks.
But they are the foundation of any plumbing work. And, any kind of mistake can bring unwanted consequences to the entire project. Therefore, it is best to take care of minor adjustments before proceeding with the real work.
3. Know About The Electrical Lines
Before installing the plumbing system for sinks, plumbers need to know when to reinstall or uninstall the electrical lines. It becomes an important factor, especially during major plumbing renovations such as installing a new one.
For example, reinstalling the main utility line and realizing later that the electric lines have to be reframed. As such, the process will take more time and effort for a plumber to undertake. Besides, it could be an expensive affair as well.
4. Over Tightening The Connectors
Another frequent mistake that many plumbers make is over tightening bolts, pipe fittings, and supply tubes. When you crank too hard on plastic or galvanized pipe, elbow, or coupling, the fitting might crack.
Although the crack might not occur right away, the excessive force could break the fitting many weeks later and even cause a flood. Sometimes, over tightening closet bolts between the tank and bolt or at the floor can crack the sink if it’s made of porcelain.
How To Perform Quick Fixes To Hold Leaks Until A Licensed Plumber Arrives:
Imagine a situation where you find your kitchen sink or bathroom has flooded. And, you try to call a plumber right away only to know that it could take a couple of hours for them to arrive. So, what do you do in the meantime? Check out these quick fixes that can hold leaks until a plumber repairs them.
1. Turn Off The Main Source Of Water
Although turning off the main water supply seems to be the most obvious step to so, you may not consider it when you see a lot of water leaking. So, turn off the main water valve if possible. However, it means that you may not be able to use the other faucets.
But you can prevent further damage especially if it is a large water leak. Besides, you should know how to turn the water supply off in your home. Before you find yourself in this situation, familiarize yourself with the main water valve and learn how to shut it down.
2. Use A Pipe Wrap To Fix The Leaky Pipe
While pipe wraps aren’t the perfect solution to stop a leaking pipe, they can stop the water from spreading further into your home. That way, you can have some time until a licensed plumber arrives and work on a permanent fix. Moreover, you can buy a pipe wrap from a nearby home improvement store.
The best part is that the wraps are great at holding mid-pipe and pipe joint leaks. Because the warp is made of fiberglass, it gets tightly wrapped around the pipe with ease. When the pipe gets wet, the wrap becomes hard and stops the leak.
Apart from that, these wraps can last for a few days to a couple of weeks. Keep in mind that they aren’t a permanent solution.
3. You Can Use Epoxy As Well
As you know, Epoxy is a strong glue that can fix almost every leak including leaky pipes as well. Therefore, consider keeping a plumber’s epoxy in your home specifically if you don’t have a pipe wrap. Besides, using it doesn’t involve great effort.
Turn off the water supply and gently wipe the area around the leak on the pipe. Next, mix the 2-part epoxy and apply the same in that area. In addition, if you have a plumber’s wrap in your home, you can wrap that over epoxy to make it stronger.
Also, it takes around 24 hours for the epoxy to cure. Hence, you should turn the water supply off for a while just to ensure that the glue has dried completely and water won’t leak around it.
4. Use Plumbing Tape
Made of silicone, plumbing tapes are useful if the leak forms at the joint between two pipes. So, if you use one, turn off the water first and wipe the pipe to make it clean. That way, it will ensure that the tape sticks to it.
Because plumbing tape might last for a couple of days, use it when you are sure enough that your plumber will arrive in a day or two. Or else, water will leak through the tape.