Low or high water pressure will not only impact your bathing or cooking experience, but inappropriate water flow can also impact the efficiency of your plumbing system. Therefore, check the water pressure when it is considerably low or high. If it is high, it will damage your plumbing system whenever you turn on the tap. However, low pressure will result in a poor bathing experience. You can hire a Carlsbad plumber to check the water pressure and improve the condition.
You can test the water pressure without taking the help of professionals. You need to follow a few steps and some materials for this purpose. The benefit is that you can check the water pressure whenever you have doubts once you know how to do it. Check the pressure and fix it if it is too low or high. An affordable plumber Carlsbad can resolve the issue without costing much.
How To Check The Water Pressure
Before covering the steps, we will discuss the tools and materials you need for the procedure. You will need tongue-and-groove pliers and a water pressure gauge. Collect these things and then test the water pressure with the following steps.
Step One: Find A Proper Location
You can choose an outdoor hose near the main water supply when you get water from the municipal water utility. However, choose a faucet close to the well when you get water from your well. You will have to choose the right location to get accurate pressure. You can find a faucet connected to the main supply in your home. The reading will be correct when the water supply is adequate. You can talk to a 24 hour plumber when you have doubts about water supply and pipes.
Step Two: Close All The Water Sources
Before testing the pressure, you can ensure that all the taps inside and outside your house are not in use. You can turn off the sprinklers, washing machines, dishwashers, refrigerators, or other possible sources. The result will be inaccurate if water is running in your plumbing system. Hence, stop the water supply first and then check the water pressure.
Step Three: Use The Pressure Gauge
You can avoid testing water pressure with the hose. Hence, remove the hose if there is any. Now, screw the gauge onto your faucet and tighten it using the tongue-and-groove pliers. Seal it properly to get an accurate reading.
Step Four: Test Water Pressure
Now, you can check the water pressure of your home. Turn the faucet on and read the pressure on the dial of your gauge. The water pressure ranges between 40 and 50 psi and should be below 60 psi. The pressure regulator can adjust the pressure up to 75 psi. When the reading is more than 75 psi, the regular is not working. You can hire a plumber near me and replace the regulator.
You can follow the above steps to check your home water pressure. The process is simple, and you can get an accurate reading if you follow the above tips. However, take the help of experts to fix it when the pressure is too high or low.